Comparison of observed ionospheric vertical TEC over the sea in Indian region with IRI-2016 model

The vertical ionospheric TEC values obtained from GAGAN grid based ionospheric delay correction values over the sea in the Indian equatorial region have been compared with the corresponding values derived from the International Reference Ionosphere model, IRI-2016. The objective of this work is to study the deviation of the vertical TEC derived from the IRI model from ground truths over the sea for different conditions. This will serve the basic intention of assessing the candidature of the IRI model as an alternative ionospheric correction model in navigation receivers in terms of accuracy. We have chosen different solar activity periods, seasons, geomagnetic conditions, locations etc. for our comparison and analysis. The TEC values by the IRI-2016 were compared with the actual measured values for the given conditions and errors were obtained. The measured vertical TEC values at the ionospheric grid points were derived from the GAGAN broadcast ionospheric delay data and used as reference. The IRI model with standard internal functions was used in estimating the TEC at the same ionospheric grid points. The errors in the model derived values are statistically analysed. Broadly, the results show that, for the Indian sector over the sea, the IRI model performs better on quiet days in off equatorial regions, particularly in the northern region. The overall performance degrades for other conditions with the model generally underestimating the true TEC values and most severely in the equatorial region. The performance is worst in this region for the disturbed days of the equinoctial period. The comparison study is also done with the TEC data measured directly by dual frequency GPS receivers. The results were found to be in general agreement with those obtained by comparing the model with GAGAN broadcast data as reference. This study will be useful in considering the IRI-2016 model for real time estimates of TEC as an alternative to the current parametric model in a satellite navigation receiver in absence of other options.     

27-day variation in solar-terrestrial parameters: Global characteristics and an origin based approach of the signals

The Earth and the near interplanetary medium are affected by the Sun in different ways. Those processes generated in the Sun that induce perturbations into the Magnetosphere-Ionosphere system are called geoeffective processes and show a wide range of temporal variations, like the 11-year solar cycle (long term variations), the variation of ～27?days (recurrent variations), solar storms enduring for some days, particle acceleration events lasting for some hours, etc.In this article, the periodicity of ～27?days associated with the solar synodic rotation period is investigated. The work is mainly focused on studying the resulting 27-day periodic signal in the magnetic activity, by the analysis of the horizontal component of the magnetic field registered on a set of 103 magnetic observatories distributed around the world. For this a new method to isolate the periodicity of interest has been developed consisting of two main steps: the first one consists of removing the linear trend corresponding to every calendar year from the data series, and the second one of removing from the resulting series a smoothed version of it obtained by applying a 30-day moving average. The result at the end of this process is a data series in which all the signal with periods larger than 30?days are canceled.The most important characteristics observed in the resulting signals are two main amplitude modulations: the first and most prominent related to the 11-year solar cycle and the second one with a semiannual pattern. In addition, the amplitude of the signal shows a dependence on the geomagnetic latitude of the observatory with a significant discontinuity at approx. ±60°.The processing scheme was also applied to other parameters that are widely used to characterize the energy transfer from the Sun to the Earth: F10.7 and Mg II indices and the ionospheric vertical total electron content (vTEC) were considered for radiative interactions; and the solar wind velocity for the non-radiative interactions between the solar wind and the magnetosphere. The 27-day signal obtained in the magnetic activity was compared with the signals found in the other parameters resulting in a series of cross-correlations curves with maximum correlation between 3 and 5?days of delays for the radiative and between 0 and 1?days of delay for the non-radiative parameters. This result supports the idea that the physical process responsible for the 27-day signal in the magnetic activity is related to the solar wind and not to the solar electromagnetic radiation.     

A non-local vectorial total variational model for multichannel SAR image speckle suppression

This paper aims at the multichannel synthetic aperture radar(SAR)image speckle reduction.This paper proposes a novel energy minimized regularization model for multichannel image denoising,which is an extension of the non-local total variational model for gray-scale image.It contains two terms,namely the vectorial data fidelity term and the non-local vectorial total variation term.The latter is constructed by high-dimensional non-local gradient that contains the structure information of the multichannel image.The existence and the uniqueness of the solution of the model are proved.A fixed point iterative algorithm is designed to acquire the solution of this model.The convergence property of this algorithm is proved as well.This model is applied to the multipolarimetric and multi-temporal RADARSAT-2 images despeckling.The result shows that this model performs better than the original vectorial total variational model on texture preserving.     

复合材料加筋壁板的两步优化法

通过采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用MSC．PAT－RAN／NASTRAN的参数化建模与遗传算法相结合的复合材料加筋壁板的两步优化方法,对复合材料T型加筋壁板进行了从2000 N／mm到6000 N／mm压缩载荷下的结构优化分析。提出的基于参数化模型和遗传算法的复合材料加筋壁板的两步优化法分为壁板级优化和层压板级优化两部分,在壁板级优化得到最优的结构尺寸参数,在层板级优化得到最优的层压板铺层顺序。     

航空涡轮叶片气膜孔参数化建模研究

介绍了航空涡轮叶片气膜孔参数化建模的现状,分析了其参数化建模的难度。提取了气膜孔参数化建模的参数,提出了以一组气膜孔为对象的参数化建模流程及参数检查方法,解决了涡轮叶片设计过程中气膜孔反复修改耗时耗力的问题,从而提高了涡轮叶片的设计效率。     

翼型高低速性能优化及其对缝翼设计影响研究

采用Hicks-Henne方法参数化翼型,以巡航升阻比、低速最大升力系数为目标进行优化设计.利用试验设计方法对总体设计空间内目标函数的分布进行初步评估,得到目标函数的初始Pareto前沿面,以前沿面上的点为基准,把总体设计空间分割成独立的局部设计空间进行并行寻优,逐步更新直至得到收敛的Pareto前沿面.对前沿面上的典...     

鼠笼式弹性支承结构参数优化设计与试验

进行了鼠笼式弹性支承的优化设计与试验研究.基于遗传算法和MATLAB开发了优化设计软件,进行了某航空发动机鼠笼式弹性支承的结构参数优化设计,并进行了柔度试验和疲劳应力试验.结果表明,疲劳应力下降到原来的40%,优化结果与试验结果的误差小于6%,验证了优化设计的有效性.     

高速飞行器热结构工作时变模态参数辨识

高速飞行器由于其很高的飞行速度而无可避免地受到气动加热作用的影响,进而引起结构特性的时变。采用理论或有限元方法(FEM)进行数值分析,难以获取反映结构在飞行(工作)状态下的真实模态参数。通过辨识获取高速飞行器热环境下的时变结构模态参数是一项十分具有挑战性的任务。针对此问题,引入参数化时频域的最大似然方法,对气动加热作用下的高速飞行器升力面结构的时变模态参数进行了辨识。通过模拟真实飞行状态的数值算例研究,说明参数化时频域的最大似然方法能够很好地辨识出低信噪比(SNR)情况下的模态频率和模态振型,验证了参数化时频域最大似然方法适用于具有显著时变特征的高速飞行器热结构的时变结构模态参数辨识,可为将来相关的工程研究和应用提供良好的理论支持。     

星载微波传感器大气温湿度物理反演算法研究

针对我国下一代静止轨道微波探测器资料应用的需求,对微波50~60GHz和183GHz的温湿遥感通道开展了不同大气条件下探测敏感高度的模拟,发现大气散射对微波探测影响明显,尤其是近地面通道,在未来数据应用时需加以注意。提出一种基于一维变分的大气温湿度廓线物理反演算法。以美国最新一代气象卫星Suomi NPP搭载的ATMS(Advanced Technology Microwave Sounder)获取的观测资料为研究对象,RTTOV(Radiative Transfer for TOVS)快速辐射传输模式为前向算子,利用一维变分算法开展了温湿度廓线反演单点试验。研究发现:地表参数对微波亮温,尤其是地面通道影响较大。同时,反演所需背景场对反演结果影响较明显,反演所得温度与背景场较接近。     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.